10/100/1000Mbps PoE Injector.
Input Voltage :
Rated voltage (Nominal Voltage): 100-240V Ac adjustment range (Variation Range): 80-264V Ac
Nominal Frequency: 50 / 60Hz Variation Frequency: 47-63Hz
Input Current :
Inrush Current :
AC Leakage Current:
When the input voltage 240Vac, the maximum leakage current of 0.25mA. /0.25mA Max At 240Vac input.
Boot, first determine whether the load is 25KΩ resistance characteristics (that is, whether the load in the connected), the corresponding feedback
The voltage is 1V-11V. And then start the power classification test: first output voltage between 14V-25V, according to the feedback current automatically
Assign a current reference (Range: ± 10%). When the normal working hours of current in the 80mA ≤ I ≤ 720mA range
Within the normal power supply beyond the current load into the protection state until the fault cleared or after the chip 2S re-
Detection, the failure to confirm the work before they can be solved, then every 1S repeated testing time.
Voltage Line Regulation
+ 48.0 Vdc
0 ℃ ~ -40 ℃, full load, normal work (Full load Normal operation).
0 ℃ to 40 ℃, Full load Normal operation.
Storage Temperature: – 20 ℃ to85 ℃, with shell (With package).
Operating Humidity (Relative Humidity):
5% (0 ℃) ~ 90% (40 ℃), 72 hours, full load, normal work
5% (0 ℃) ~ 90% (40 ℃) RH, 72Hrs, Full load Normal operating.
Test standards: International Electrotechnical Commission
5 ~ 9Hz, A = 1.5mm Acceleration (9 ~ 200Hz, Acceleration 5m / s2)
Transportation: IEC 721-3-2 2M2
5-9 Hz, A = 3.5 mm
9 ~ 200Hz, acceleration = 5m / S2
200 ~ 500HZ, the acceleration = 15m / S2
axial vibration: (Axes, 10 cycles per axis).
Permanent damage cannot occur during the test.
After the power is turned on and off, the prototype can be restored to its original condition.
Dropping test (Packed):
1 corner, 3 edges, and 6 surfaces
Height 76m Height: 76cm
The power supply size L145 * W62 * H40mm
_ Catalogue Switchs TELESYSTEM: PDF
_ TS-I48G-AT_Datasheet: PDF