DD IAT-1710E Integrated Access Tester

Catégories : , Étiquettes : , ,

Product Description

In the operator's client base, the government, the enterprise group, bank, insurance company are very important persons. These clients generally provide bandwidth adopting E1 leased line, MSTP special line and IP line, provide communication between the branches, Internet access and other services. For the maintenance of these customers, maintenance engineer mainly faces two problems, one is the customer may question the channel bandwidth especially when Ethernet circuit access via MSTP network; Second, in order to meet customer's requirement, provide higher service quality and faster response speed, when there is circuit failure, maintenance personal should quickly locate fault point and solve the problem, so the engineer in charge of higher work ability.

After many times go deep into the frontline practice and communication with operators maintenance engineer, DADI Telecom developed a new generation Integrated Access Tester, model of IAT-1710A which is combined with the function of DADI original instrument. IAT-1710A can verify the bandwidth through a variety of test methods to help maintenance engineers to settle the bandwidth question in MSTP and IP line access, and through a simple function of high-speed PING help maintenance engineers quickly locate the fault point.

  • Apply to verify special line bandwidth and quick troubleshooting for operator, government etc.
  • Apply to open and maintenance testing of MSTP/MSAP net
  • Integrated testing of E1, V and 1000M Ethernet
  • Various way for bandwidth verification, support symmetric and asymmetric RFC2544 testing
  • Original high speed PING test, freely set the PING rate and up to 1000Mbps, which can help quickly address fault
  • Optimized structure design to ensure the safety and stable
  • Similar interface to smart phone makes it easier to use
  • New hardware platform and optimized software algorithm support fluently operation
  • General Indicators

    Size

    216x109x56mm

    Weight

    <1.5kg

    Display

    5”LED, 480×272 color screen

    Operation

    Touch

    Storage

    2G SD card

    Rechargeable li-ion battery

    Charging time

    3~4H

    Operating time

    >5H

    Environment

    Operating temperature

    -10~50℃

    Storage temperature

    -20~70℃

    Operating humidity

    10% ~ 90%

    Storage humidity

    5% ~ 95%

    E1 Interface Specifics

    TX clock

    Internal clock, received clock

    Clock frequency offset

     

    setting

     

    Range: +/-50ppm,resolution of 0.1ppm,precision of +/-15ppm

    Clock frequency offset testing

    Range: +/-1000ppm, resolution of 0.1ppm, precision of +/-15ppm

    Signal level detection

    Range: 0~37.5dB, precision of 2.5dB

    Interface resistance

    75Ω unbalance, 120Ω RJ48 balance interface

    Frame

    UnFramed,PCM30,PCM31,PCM30C,PCM31C

    Code type

    HDB3,AMI

    Analysis standard

    G.821,G.826,M2100

    V Series Interface Specifics

    Type of Vinterface

    V.35,V.24

    Working mode

    DTE,DCE

    Transmission mode

    synchronous

    Rate

    2048K,Nx64K,Nx56K

    Analysis standard

    G.821

    10/100/1000M Ethernet test specifics

    Frame type

    DIX,802.3SNAP

    Custom frame length

    40-10000

    Typical frame length

    64,128,256,512,768,1024,1280,1518

    RFC2544 testing

    Throughput, Latency, Frame loss, Back-to-back frame

    Precision of Throughput

     

    test

     

    0.001Mbps

    Precision of Latency

    1us

    Precision of Frame Loss

     

    test

     

    0.001%

    Protocol type of

     

    Network Layer

     

    IP, IPX, ARP, RARP, Banyan, DECnet, Apple Talk, DADI, Custom

    Data loopback level

    Physical Layer, Date Link Layer, Network Layer