TS-1008

Industrial Class Wall Mounted RS-232 to RS-422/485 Isolated Interface converter standards and capable of converting single end RS-232 signal into RS-422 or RS-485 signal of balanced signal.

Product Description

The built in photoelectric isolator can offer 3500V isolation voltage and the rapid Transient Voltage Suppressor (TVS) can effectively inhibit lightning and ESD, prevent lightning strike and common code interference.

Connect PC,IPC,or portable computer via a DB9 female connector at RS-232 interface, and connect RS-422, RS-485 end via convenient 4-bit terminal.

The RS-485 supports dual-line half duplex.The inner circuit of TS-1008N Photoelectric Isolation Interface Converter can detect data direction and switch to control it automatically, conveniently to form a RS-485 network without any shake hand signal.

This kind of RS-485 control is fully transparent and need no software amendment for the former working modes basing on RS-232.

TS-1008N Photoelectric Isolation Interface Converter can provide credible connection for point to point, point to multi-point communication.

The point to multi-point allows connecting 256 RS-422 or RS-485 interface devices with data transmission speed of 0-115.2KBPS.

The 3 power supply and data flow indication light can indicate malfunction. It supports communication modes including RS-232C to RS-422, RS-232 to RS-485 conversion.

                                                              Communication Parameters
Interface Compatible with EIA/TIA RS-232C,RS-485/422
Transmission Media Twisted-pair cable or shielded cable
Working Mode Asynchronous half or full duplex
Direction Control Automatic direction control of transmitting data (TXD), zero-latency design
Baud Rate 300-115.2kbps
Transmission Distance 0-5 Km
Connector RS-232 RJ-45 connector, Equipped with DB9
RS-485/422 DB9 connector and terminal block
Load Capacity Point to multi-point, allow to connect 256 RS-422 or RS-485 interface device
Isolation 3500VRMS,500VDC sequence
Protecting Grade RS-232 interface 600W lightning strike and surge protection, RS-422, RS-485 interface 1000W lightning strike and surge protection on each line
Power Supply Parameters
Power Supply

External power supply at RS-232 end

DC/DC Isolation power supply at RS-422/485 end

Physical Characteristics
Signal Indication 3 signal indication lights indicate TXD RXD and PWR
Housing Iron
Weight 0.6Kg
Dimensions 100 x 86 x 26mm
Operating Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Temperature -40 ~ 85°C (-40 ~ 176°F)
Ambient Relative Humidity 5% to 95%(non-condensing)
Standards and Certifications
RoHS, CE, FCC

TS-1008N Photoelectric Isolation Interface Converter can provide credible connection for point to point, point to multi-point communication.

The point to multi-point allows connecting 256 RS-422 or RS-485 interface devices with data transmission speed of 0-115.2KBPS. The 3 power supply and data flow indication light can indicate malfunction.

It supports communication modes including RS-232C to RS-422, RS-232 to RS-485 conversion.

  • Point to point, point to multipoint communication
  • Industrial distribution system, industrial control automation
  • Road traffic control automation
  • Closed circuit monitoring
  • Security protection system
  • Intelligent card, check on work attendance gate safety system

Download:

TS-1008_RS-232C, RS-422, RS-485: PDF