TS-IMF4G24-P

Managed Industrial POE Fiber Switch, 4 x 1000Mbps SFP fiber ports, 24 x 10/100/1000Mbps TX RJ45 ports

Catégorie :

Product Description

TS-IMF4G24-P series is the 10/100/1000 Mbps industrial POE fiber switch, comply with IEEE802.3af, power on POE IP cameras through the Ethernet cable, operating temperature-40 ℃to + 85℃, support wide voltage dual power input, meet IP30 protection degree and EMC industrial grade requirements, support many managed functions, include RSTP IGMP, VLAN, Qos, IPV6, Loop protection, ERPS and so on. pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.

  • Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
  • IEEE 802.3af power on to 1 ~ 24 RJ45 ports
  • 24 x 10/100/1000Mbps Auto-sensing TX RJ45 ports ( Port 23 and 24 are COMBO ports)
  • 4 x 1000Mbps SFP fiber ports( Port FX3 and FX4 are COMBO ports)
  • Support cable diagnosis and can locate the fault point
  • Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
  • Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
  • Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
  • Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
  • Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
  • Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
  • Support IGMP agent report, MLD snooping
  • Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
  • Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
  • Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
  • Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
  • Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
  • Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
  • Product Name

    10/100/1000Mbps managed Industrial  POE Fiber Switch (4F+24TP)

    Model No.

    TS-IMF4G24-P

    Port

    4 x 1000Mpbs SFP ports (Port FX3 and FX4 are COMBO port)

    24×10/100/1000M UTP RJ45( Port 23 and 24 are COMBO ports)

    Standard

    IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az

    VLAND ID

    4096

    Jumbo Frame

    9.6KB

    MAC Address Table Size 

    8K

    Poe Standard

    IEEE802.3af, total MAX power is 340W

    Switching features

    Transmission modestorage and forward

    System bandwidth48Gbps (non-traffic jam)

    Network media

    10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m)

    100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)

    SFP porttransmission distance: 20Km40Km60Km80Km100Km

    LEDs

    Power, network, fiber

    Power supply

    Input voltageDC48V

    Non-polar power input support

    Environment             

    Working temperature-40° 85°C

    Working humidity5%95%non-condensing

    Industry Standards

    EMIFCC Part 15 Subpart B Class AEN 55022 Class A, EN61000-6-4- Emission for industrial environment

    EMSEN61000-6-2-Immunity for industrial environment, EN 61000-4-2 (ESD) Level 3EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3EN 61000-4-8

    Traffic ControlNEMA-TS2, VibrationIEC 60068-2-6

    FreefallIEC 60068-2-32, ShockIEC 60068-2-27

    Rail TrafficEN 50121-4

    Mechanical information

    Safety classIP30

    Dimension483x 275 x 44.5mm

    Warranty

    Replacement within 1year; 5 years repairing