TSV-IPB200-xE1 VOIP Trunk Gateway

Catégories : ,

Product Description

TSV-IPB200-xE1 Trunk Gateway enables direct routing of calls between the fixed line ISDN and the cost-effective IP networks for capitalizing on low cost VoIP telephony. By integrating TSV-IPB200-xE1 Trunk Gateway with existing PBX/PABX telephone systems, businesses of all sizes can benefit from low-cost Voice over IP calls and achieve substantial cost savings without the high up front costs associated with communications infrastructure changes related with the migration to VoIP.

TSV-IPB200-xE1 offering PBX/IP-PBX users a powerful telephony cost saving device and advanced flexible routing capabilities between ISDN PRI/SS7 to SIP, and also can be situated between the PBX and the PSTN, saving the cost of an additional PBX E1/T1 port. It is ideal for telecom distributors, resellers and service providers.

  • Efficient concurrent processing, up to 60 channels
  • Support flexible dialing rules and operations, allowing users to customize dialing rulesaccording to differentworking environments
  • Support T.38,Pass-through fax, as well as modem and POS machines
  • Support multiple coding standards: G.711A/U, G.723.1, G.729A/B and AMR
  • High compatibility, interoperable with PBX of Avaya, NEC and Alcatel, and also leadingsoft-switch of Huawei,Cisco and ZTE etc.
  • E1/T1 Ports: 1 to 4 E1/T1

    Interface Type: RJ48(Impedance 120Ω)

    Ethernet Interface:

       GE1: 10/100/1000 Base-T Adaptive Ethernet

       GE0: 10/100/1000 Base-T Adaptive Ethernet

    Serial Port: 1* RS232, 115200bps


    G.711a/μ law,G.723.1,

    G.729A/B, iLBC 13k/15k,AMR

    Silence Suppression

    Comfort Noise

    Voice Activity Detection

    Echo Cancellation (G.168), with up to128ms

    Adaptive Dynamic Buffer

    Voice ,Fax Gain Control

    FAX:T.38 and Pass-through

    Support Modem/POS

    DTMF Mode:

    RFC2833/SIP Info/In-band

    Clear Channel/Clear Mode


    23B+D(T1),30B+D(E1),NT or TE

    ITU-T Q.921, ITU-T Q.931, Q.Sig

    Signal 7/SS7



    R2 MFC

    China and other 22 variants standard

    E1 Frame Type : DF,CRC-4,CRC_ITU

    T1 Frame Type :

    4-Frame Multi-frame (F4,FT)

    2-Frame Multi-frame (F12, D3/4)

    Extended Super-frame (F24, ESF)

    Remote Switch Mode (F72, SLC96)

    Line Codes:



    Local/Transparent Ring Back Tone

    Overlapping Dialing

    Dialing Rules, with up to 2000

    PSTN group by E1 port or E1 Timeslot

    IP Trunk Group Configuration

    Voice Codecs Group

    Caller and Called Number White Lists

    Caller and Called Number Black Lists

    Access Rule Lists

    IP Trunk Priority

    SIP v2.0 (UDP/TCP),RFC3261

    SDP,RTP(RFC2833), RFC3262,


    RTP/RTCP, RFC2198, 1889


    SIP-T,RFC3372, RFC3204, RFC3398

    SIP Trunk Work Mode :Peer/Access

    SIP/IMS Registration :

    with up to 256 SIP Accounts

    NAT: Dynamic NAT, Rport

    Web GUI Configuration

    Data Backup/Restore

    PSTN Call Statistics

    SIP Trunk Call Statistics

    Firmware Upgrade via TFTP/Web

    SNMP v1/v2/v3

    Network Capture


    Debug, Info, Error, Warning , Notice

    Call History Records via Syslog

    NTP Synchronization

    Centralized Management System

    1+1 Redundancy Power Supply

    Input 100-240VAC, 50-60 Hz

    Power Consumption:15W

    Operating Temperature:0 ℃ ~ 45 ℃

    Storage Temperature: -20 ℃ ~80 ℃

    Humidity:10%-90% Non-Condensing

    Dimensions(W/D/H): 436*300*44.5mm(1U)

    Unit Weight: 2.0kg

    Compliance: CE, FCC